RF Explorer Touch Advanced Configuration

Some advanced configuration settings are available for expert users tune-up.

This should be modified only if you are comfortable changing XML files and understanding XML syntax.

The advanced configuration parameters are stored in file RFETouch.xml. This file can be found in following locations depending on OS:

C:\Users\<username>\AppData\Roaming\RFExplorer

Note

Only these parameters described should be modified, other RFETouch.xml configuration parameters should not be modified.

Incorrect file update may damage XML structure or values and may lead to configuration loss.

It is advisable to backup the RFETouch.xml before any modification is made.

Parameter

Default

Values

Description

IsIOTModule

true

true/false

Use true for IoT module, or false for Handheld Analyzer. This setting is set by default to true in Raspberry Pi SDCard image files, and false otherwise

ShutdownRPiOnCloseApp

true

true/false

Use true to shutdown Linux when RFETouch is closed, other case set to false. This setting is set by default to true in Raspberry Pi SDCard image files, and false otherwise

IoTPortName

/dev/ttyAMA0

/dev/ttyAMA0
/dev/ttyS0

For Raspberry Pi only: Set serial port name either as /dev/ttyAMA0 or /dev/ttyS0 depending on UART configuration (useful in Raspberry Pi 4B). This parameter is ignored for USB devices, only RF Explorer IoT module is affected by this setting in a Raspberry Pi.

OpenGL support in Windows

OpenGL library and capable driver is needed to display Waterfall mode. You can disable OpenGL support if your driver card reports any problem by adding /o to the application shortcut

RFETouchWin.exe /o

Raspberry Pi: How to disable RFETouch auto-start

In SDCard images provided for Raspberry Pi, the RFETouch application is configured to automatically start after the Raspbian GUI is loaded.

If you want to disable this behavior and load RFETouch manually, locate the autostart configuration file which may be in one of the following locations, depending on Raspberry Pi model:

  • /home/pi/.config/lxsession/LXDE-pi/autostart
  • /etc/xdg/lxsession/LXDE-pi/autostart

Edit this file using <sudo nano> or equivalent editor as superuser, and remove this line:

@lxterminal -e sudo /home/pi/RFExplorer/RFETouch